���ѻ�еרע��ʽ�����,����Һ�±�,����ͷ���۱�,��ʽҺ�±�,Ͳ��ʽ����ˮ��,Hϵ��ֱ�dz����䣡
�ֻ���վ Ӣ����վ ����|����
�������ߣ�18507312158 15111351988
��ʽ����ѭ��ˮ��
��ʽ�����ǻ�ˮ��
��ʽ˫��ֳ����
��ʽ����ֳ����
��ʽ����̲���ֳ����
��Ͳר����ʽ�����
LTDN��ʽ�༶Ͳ��ʽ����ˮ��
CCB�Ͳͳ����������
Hϵ��ֱ�dz�����
YWϵ�С�RV-SPϵ�г���Һ����ˮ��
PWDDFL��ʽ����ͷ���۱�

��ҳ/����ˮ��/��ʽ�������

���λ������¼����

2019/1/14 22:23:16 �����

LB�Ͳ��ɳ�ʽ��ʽ����͸ƽ��Vertical Mixed Flow Pump_���λ�j9����������Ϸ��һƷ��

LB��ת�Ӳ��ɳ�ʽ��ʽ����͸ƽ����Ʒ����

LB�Ͳ��ɳ�ʽ��ʽ����͸ƽ�������ڵ糧���ֳ�������ˮ��˾����ˮ������ʯ�ͻ�������ɽ�ȹ�����ҵ���Լ���������ˮ���̡�ũҵ��ȡ��������Եȹ��̡�������������55�����µ���ˮ����ˮ����Ƥ��ˮ����ˮ�Լ���ˮ�Ƚ��ʣ�������Χ30-8400m³/h����̷�Χ10-200m��������Ƶ����ͽ����¶ȿɴ�90�档

Description

The said series pumps are used to transfer clear water,rain water,water in iron sheet pits,sewage and seawater,servicing in power plants,iron and steel works,water supply companies,sewage treatment plants,petroleumand chemical industries,mines as well asmunicipalwater supply and drainage projects,farmlands irriagation,flood protection and drain waterlogged farmlands,etc..The temperature of pumped media is below 55��and reaches to 90��for special design. The flow rate ranges from 30 to 8400m3/h and the headfrom 10 to 200m.

LB�Ͳ��ɳ�ʽ��ʽ����͸ƽ����Ʒ�ص�

1������ƽ�ȣ���ȫ�ɿ���������������ʹ���������ڳ���

2�������С������ռ������٣��������±ó��ȿ��Ե�������Ӧ��ǿ��

3�������ɿ�����ʡ�÷�����Ͷ�ʡ�

4���ṹ����װ�㣬ά���������׼�㡣

5����Ч�ʸߣ��������гɱ���

Features

1.Operation smooth,safe and reliable,starting without exhausting vacumn,service life long.

2.The volumn of the pump small,lessoccupiedland area, the length under foundation adjustable,applicability strong.

3.Flowing channel simple andreliable,saving the investment for construction of the pump house.

4.Structure reasonable,convenient for mounting and dismantling,,easy to maintain and inspect.

5.Efficiency high, operating cost reduced.

LB�Ͳ��ɳ�ʽ��ʽ����͸ƽ���ͺ�˵��

500LB—55.3��(×2��3)

500——���³��ھ�500mm

L———��ʽ����͸ƽ��

B———ת�Ӳ��ɳ�о

55.3———�õ�������

��———�����˳��һ������ޱ�ʾ��

×2———��ʾ�õļ���Ϊ2��

500LB-55.3��(×2��3)

500Outlet of the pump:500mm

L---Vertical mixed flow pump

B---Non pull-out rotor

55.3---Design head

��---Pump design class(no mark whenfirst time design)

×2-- Stage number

LB��ת�Ӳ��ɳ�ʽ��ʽ����͸ƽ�ò�Ʒ�ṹ˵��

��ͼһ.LB�Ͳ��ɳ���ʽ����͸ƽ�ýṹ��ͼ(��ʽ:ST)Sectional Arrangement Of Type LB(Type ST)

LB����ʽ����ýṹ��ͼ(��ʽ-ST) Sectional Arrangement Of Type LB(Type ST).jpg

��ͼ��.LB����ʽ�����͸ƽ��2���ṹ��ͼ(��ʽ:ST)Sectional Arrangement Of Type LB With Two Stages(Type ST)

LB����ʽ����������ṹ��ͼ(��ʽ-ST)Sectional Arrangement Of Type LB With Two Stages(Type ST).jpg

1��LB����ʽ�����Ϊ��ʽ�������༶������ʽ��б��ʽ����Ҷ��ṹ��

2���õĽṹ��ʽ�б��³����ڰ�װ����֮�Ϻ�֮��(��ʽ���ŷֱ�ΪS��X)���ó����������͵������������(��ʽ���ŷֱ�ΪT��D)�������ˮ�ͱ���������ʽ��

3���ð�װ��ʽ��ʪ��ʽ��װ��ɿ�ʽ��װ��

ʪ��ʽ��װ�����²���û����ˮ���С�

�ɿ�ʽ��װ���ò��ùܵ���ˮ�����������ȿ����ˮ�ܵ�֮�����90°���ν�ˮ������ӡ�

4�������Ϊ����л���������С�

5���ÿھ���1000mm����ʱ����ת��һ��Ϊ���ɳ���ʽ��������ˮ������ת������һ���ɱñ���������г��ܣ��ú͵��֮����õ������ӣ����³���λ�ڰ�װ�����֮�ϣ���ʽ����ΪST�Ľṹ��ʽ��������Ҫ��Ҳ�����ɵ����������ˮ������ת���������������ṹ��ʽ����ϣ���ʽ����ΪSD��XT��XD��;�û�����Ҫ�� Ҳ������Ƴɿɳ�ʽ�ṹ��ʽ���ÿھ���1000mm����ʱ����ת��һ��Ϊ�ɳ���ʽ��������ˮ������ת������һ���ɵ��������г��ܣ��ú͵��֮����ø������ӣ����³���λ�ڰ�װ�����֮�£���ʽ����ΪXD��������Ҫ��Ҳ�����ɱó�������ˮ������ת���������������ṹ��ʽ����ϣ���ʽ����ΪXT��SD��ST�����û�����Ҫ�� Ҳ������Ƴɲ��ɳ�ʽ�ṹ��ʽ��

6���ñ����������ˮ������ת������ʱ����������в���ϡ����������в�����Pt100����Ԫ��������¶Ȼ�ѹ��ʽ�¶ȼƲ������¶ȡ�

7���������ܷ���������ܷ⡣

8���ڱð�װ�����Ͽ��Խ���Ҷ����Ҷ���ң�ת�������뾲ֹ���֣�֮���϶�ĵ������������㡣

9�����³��������ÿ���������ߺ���������ˮ�ӹ�λ����ࡣҲ�ɸ����û�Ҫ������������λ��

Structure feature:

1.Series LB pumps are of vertical single stage and/or multistage centrifugal or mixed flow with diffuser types.

2.Thefollowing structure types are available for the pump:the discharge opening above and/or under the mounting foundation(Type Code named S and X respectively);the axial thrust force born by the pump and/or by the motor(Type Code named T and D);lubricating water from outside and/or from the pump itself.

3.The intake sump is of wet pit and/or dry pit types.

Wet pit type:lower part of the pumpinundatedin the intake sump.

Dry pit type:the water enters into the pump,the suction bellmouth is connected with the inlet pipe of the pump by means of elbow bend pipe of 90.

4.Rubber guide bearings and /or the Thordon guide bearings are available for bearings of the pump.

5.Generally when the nozzle diameter of the pump is under 1000mm , non pull-out type is adopted for the rotor and the discharge opening is above the mounting foundation(Type Code named ST). In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the pump itself and flexible connection is adopted between the pump and the motor.The thrust force and the weight of the rotor can also be born by the motor if required,or other structure types such as SD,XT,XD are available .Rotor pull-out type can also be adopted if required by clients.

Generally when the discharge diameter of the pump is above 1000mm, pull-out type is adopted for the rotor and the discharge opening is under the mounting foundation(Type Code named XD).In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the motor and rigid connection is adopted between the pump

and the motor. The axial thrust force and the weight of the rotor can also be born by

the pump if required,or other structure types such as XT,SD,ST are available .Rotor non pull-out type can also be adopted if required by clients.

6.When the axial thrust force and the weight of the rotor are born by pumpitself,the thrust bearing of the pump is lubricated with dilute oil and is equipped with a temperature detector Pt100 to detect bearing temperature and a pressure type thermometer to detect the temperature of lubricating oil.

7.The antielectrochemical corrosion appliance is adopted for the part of the pump contacting the liquid to ensure the service life of the pump when seawater is pumped.

8.The packing seal is adopted for the axial seal of the pump.

9.The clearance between the impeller and the impeller chamber,i.e.the rotating component and the static component,can be easily adjusted on the pump mounting foundation.


LB�Ͳ��ɳ�ʽ��ʽ����͸ƽ����Ʒ��Ҫ�㲿������Materials Of Major Parts

���� Media

��� Parts

��ˮ

Clear water

��ˮ

Seawater

��ˮ����ĥ�ϣ�

Sewage��incl.of abrasiv powder��

�³����

Discharge elbow

�м�ӹܣ��⡢�ڣ�

Intermediate column (internal & external)

Q235-A

HT200Ni2Cr

0Cr18Ni9

ZG0Cr18Ni12Mo2

Q235-A

��Ҷ���������ȿ�

Guide vane,

Suction bellmouth

HT200

HT200Ni2Cr

ZG0Cr18Ni9

ZG0Cr18Ni12Mo2

HT200��QT500-7

ZG1Cr13Ni1

Ҷ��

Impeller

ZG1Cr13Ni1 HT200

ZG0Cr18Ni9

ZG0Cr18Ni12Mo2

QT500-7

ZG1Cr13Ni1

Ҷ���ҡ��ܷ⻷

Shroud,wearing ring

HT200

ZG2Cr13

ZG0Cr18Ni9

ZG0Cr18Ni12Mo2

ZG1Cr13Ni1

QT500-7

����

Main shaft

45��2Cr13

2Cr13��0Cr18Ni9

0Cr18Ni12Mo2

45��2Cr13

1Cr18Ni9

����

Shaft sleeve

45,2Cr13

2Cr13��0Cr18Ni9

ZG0Cr18Ni12Mo2

2Cr13��1Cr18Ni9

�����

Guide bearing

HT200+��ĥ��

HT200+abrasive rubber

HT200+����

HT200+Thordon bearing

HT200+��ĥ��

HT200+abrasive rubber

HT200+����

HT200+Thordon bearing

HT200+��ĥ��

HT200+abrasive rubber

HT200+����

HT200+Thordon bearing

ע�������û�����ʹ��Ҫ����ѡ�����ʺϲ��ʡ���������Ҷ��ֻ�����ڱ�ʽҶ�֡�

Remarks:Other materials are available at the request of clients.Cast iron is suitable only for closed type impeller.

LB�Ͳ��ɳ�ʽ��ʽ����͸ƽ������ͼ

LB����ʽ����͸ƽ�����γߴ�ͼ(������ʽXD)